The dynamic development of modern architecture implies a constant improvement in processes aimed at directly optimizing not only the design, but also the construction of various objects. The most effective method of this optimization today is the active use of advanced 3D technologies, which make it possible to bring visual, constructive, technical and technical solutions to a qualitatively new level.
What is 3D modeling?
According to Starting professionals, 3D modeling is the design of a three-dimensional model from a previously developed drawing or sketch. To create a volumetric model of an object, special visualization software products and hardware devices in the form of computers, tablets and office equipment are used. In model making, Commercial 3D rendering is an important step – to convert the rough variation of the model into a visually appealing format.
Modern three-dimensional computer graphics allow you to create the most realistic models of an object that are difficult to distinguish from an ordinary picture. A professionally modeled presentation enables you to present a product or service to potential customers, partners, investors at a high level. You may know that Top 6 architectural projects that skilled designers need to find out how important it is to work with real professionals to get such impressive projects.
Visibility and clarity
We consider this point to be one of the most important as it is about 3D nodes and 3D drawings that allow clear and immediate interpretation of the ideas inherent in the project, both by the builder and directly by the client. This means you don’t have to sit like you did before and understand complex sections, plans, details, or have drawing skills to interpret engineering drawings. Now all that is left is a small 3D diagram with explanations, with which we supplement almost each of our sheets in the architectural and constructional area.
Since all elements and structures of the house are reflected in the model, a large number of inaccuracies and errors that so often occur in “flat” 2D construction can also be avoided. The architect sees how the parts of the building, the structural elements and the technical equipment are connected and eliminates errors such as “the beam penetrated the window” or “they did not leave a hole in the ceiling under the duct”, etc. This lowers construction costs Additionally.
Why 3D technology?
3D digital modeling (BIM) is used by half of the architecture firms worldwide today, and few argue with the fact that the advent of BIM marked a real revolution. Architects finally have the perfect opportunity to convey their ideas quickly, clearly, visually and precisely to the customer.
Visibility is the golden rule of architectural design, and with the use of 3D technologies, designers and architects have the opportunity to qualitatively improve, accelerate and simplify modeling processes due to the high performance of 3D printers and low waste.
If you think about it, a few years ago people talked about 3D printing as something exotic and practically inaccessible, but the modern market is full of options for all tastes and budgets. Today, the purchase of a 3D printer is an investment in the professional and personal development of architects and designers, it allows you to optimize work processes, increase the number of projects that can be in the work of a specialist at the same time, and, accordingly, the quality Influence the dynamics of business development.
All elements of the model and parts of the building can be counted, their volume, length and almost all information about them can be obtained. This gives the builder ample opportunity to calculate the cost of building a house. For example, it is possible to count the rays for the overlap of the first floor separately or to count the rays for the entire object. Or you can estimate the cost of installing wooden beams for floors in 2 minutes, or, alternatively, consider the cost of monolithic reinforced concrete beams and see the result of the calculation in the final version of the project. In addition, the builder has full control over the material consumption during the construction of the house – after all, a detailed estimate does not give an opportunity to defraud builders and suppliers.
3D printing in commercial buildings
The use of three-dimensional printing in suburban and private residential construction enables you to implement projects of any complexity, regardless of the phase in which the architect is involved in the process. For example:
- The visualization of the existing design with the conversion into a full 3D model guarantees the efficiency in creating a perfect exterior and interior from the customer’s point of view, without restrictions in color and shape;
- Correcting a pre-made 3D model is the most fruitful phase for architects, allowing them to complete the project within a few hours and fully adapt it to the client’s wishes.
The same applies to commercial buildings – a fully-fledged, true-to-scale model enables you to zone the area more efficiently, to “fill” the interior of sales areas and galleries with goods and decorative items and also to make the floor plan more comfortable from the perspective of customers and employees. 3D modeling also has decisive advantages in terms of merchandising and advertising – even when planning a building or room, you can create a navigation system with 100% efficiency, highlight advertising and accentuate areas while maintaining the balance between functionality and aesthetics.