8 Home Plumbing System Tips To Increase Efficiency

Energy efficiency in buildings has become a major problem these days. Buildings are responsible for a large part of the world power consumption (around 40%).

Unfortunately, a significant portion of this energy comes from fossil fuels, which leads to catastrophic environmental problems.

Aside from the role of energy efficiency in reducing environmental problems, it can go a long way in helping you lower your energy bills.

One way to reduce energy consumption in your home is to optimize your plumbing system. There are many factors that affect the performance of plumbing systems.

Here are 8 useful tips from R&Z plumbing, one of the top plumbing emergency services in Toronto, Canada to increase the energy efficiency of your plumbing system and reduce your energy bills.

Insulate your pipes

This tip might be a bit basic and most of us know it. Usually there is a significant temperature difference between the air and the water that you plan to use. This difference is much larger in winter and leads to more waste of energy.

Hence, insulation is required for your pipes, especially if you live in a cold country like Canada.

Here are some of the best types of insulation for your pipes:

  • Hose rubber insulation
  • Tubular polyethylene foam
  • Fiberglass tube wrap kits
  • Foil and foam insulation

If you are unsure about the performance of your insulation, contact the best local plumbing company for help.

Use low flow toilets

There are no traditional toilets Energy efficient and waste a significant amount of heat and water. Low flow toilets can reduce 20% of the energy you waste with traditional toilets.

Despite common misconceptions, low flow toilets are just as powerful and effective as the traditional models. Standard low flow toilets available on the market do not compromise performance or performance for efficiency.

They only use 1.6 gallons per flush, which is far less than the amount of water traditional toilets waste.

Use solar panels

Solar energy has recently caught the attention of energy professionals, homeowners, and also policy makers. You can use solar energy in two different ways: photovoltaic panels and water heaters.

Solar collectors, also known as solar water heaters, can absorb energy from sunlight and add it to the water.

So it’s a perfect option to complement yours Sewage system and reduce the energy you use for hot water. If you live in an area with good sun exposure, you should opt for solar energy.

Recently, engineers have tried to combine PV modules with solar collectors to provide heat and electricity for home and commercial use.

Use a water heater

If you are still using water heaters then you need to think about changing these. Instantaneous water heaters have many advantages over traditional water heaters and can help you reduce your energy costs.

In addition to the advantage of taking up less space, instantaneous water heaters are more energy efficient. They also provide you with unlimited hot water, despite the traditional ones that only heat one tank.

More importantly, you can use non-condensing water heaters that are really efficient. A highly efficient condensing water heater offers efficiencies of more than 90%, as they achieve the higher calorific value of natural gas.

In fact, they can condense water vapor in the exhaust gases and reclaim a significant amount of energy that is wasted in traditional water heaters.

Convert your toilet into a double flush

Conventional flush toilets have only one button that allows you to use the full capacity of the toilet. On the contrary, a double flush toilet allows you to save water by providing two options.

They have an extra button for a low power flush that can be used for the time when you don’t need a lot of water.

The other button provides a full flush, similar to traditional toilets. This conversion isn’t that expensive, but it can cut your bills a lot.

Use shower heads with a low flow rate

The performance of the shower heads is measured in terms of flow (i.e. gallons per minute) [gpm]). It is good to know that water pressure affects flow rate and is measured in pounds per square inch (psi).

The higher the water pressure, the greater the volume of water.

The trick to reducing the volume of wasted water without decreasing the pressure is with low flow shower heads. They use less water but keep the water pressure up.

When you can do this, you will be using less water in the same amount of time you are in the shower and getting the same water pressure required to rinse the shampoo off your body and hair.

There are two types of low flow shower heads. First, aerated shower heads mix air into the water and use less water without reducing the pressure.

Second, non-aerated shower heads use pulses to keep the flow high while maintaining a constant temperature.

Drain water heat recovery systems

As already mentioned, heating water requires a lot of energy because the specific heat of water is very high.

Unfortunately, a significant amount of energy is wasted in drainage systems. Drain water heat recovery systems are a perfect solution to this problem. This system can recover heat from hot water leaking through the drain.

This system uses a simple coil that is in contact with the hot sewage and collects as much heat as possible. Then the heat is returned to your water heater, resulting in a significant reduction in energy consumption.

As you know, a significant amount of hot water is used for showering in private homes. So this is a good place to install a heat recovery system.

Bottom line

Energy costs make up a significant part of the cost of living for many families. If you want to cut your costs, the plumbing systems in your home are a good place to start to save energy. The tips mentioned are very useful and easy to use. You can DIY if you have enough time. Otherwise, try calling a professional team and converting your plumbing system to a modern, energy efficient system.

Comments are closed.